8
EN
Cleaning and care
•
Wipe off powder coated surfaces with soft, moist rag. Do not clean heater with cleaners that are combustible or corrosive.
•
Remove debris from the burner to keep it clean and safe for use.
•
Cover the burner unit with the optional protective cover when the heater is not in use.
During periods of extended inactivity or when transporting:
•
Turn the control to
“
OFF
”
position.
•
Disconnect LPG cylinder and move to a secure, well
-
ventilated location outdoors. DO NOT store in a location that will
exceed 50 degrees C.
•
Store heater upright in an area sheltered away from weather conditions (such as rain, sleet, hail, snow)
•
If desired, cover heater to protect exterior surfaces and to help prevent dust and debris collecting in air passages.
Warning!
•
DO NOT touch or move heater for at least 45 minutes after use.
•
Allow all burner elements to cool before touching.
Note:
In a salt
-
air environment (such as near an Ocean) corrosion occurs more quickly than normal.
•
Frequently check for corroded areas and repair them promptly.
•
Wait until heater is cooled down before covering
A. Construction and characteristics
•
Transportable terrace/garden heater with tank housing.
•
Casing in steel with powder
-
coating or in stainless steel.
•
Gas hose connections with metal clamp (screw caps for Germany). Heat emission from reflector.
B. Specifications
•
Use propane, butane or their mixtures gas only.
•
Max. wattage: 10.000 watts
•
Min. wattage: 5000 watts
•
Consumption:
→
C. Table of injector
•
The hose and regulator assembly must conform to local standard codes.
•
Regulator outlet pressure should meet the corresponding appliance category in B. Specification.
•
The appliance requires approved hose in 1.4m length.
A regulator (complies with EN16129:2013 and the national regulation) of the correct pressure corresponding to the appliance category.
Use 30mbar regulator for butane/propane under the category I3B/P(30). Use 30mbar regulator for butane under the category I3+(28
-
30/37).
Use 37mbar regulator for propane under the category I3+(28
-
30/37).
Use 50mbar regulator for butane/propane under the category I3B/P(50).
It
’
s recommended to use flexible hose that approved by EN16436: 2014.
See rating label on the next page
→
4
Summary of Contents for LH15B
Page 11: ...11 COMPONENT OVERVIEW EN ...
Page 13: ...13 ASSEMBLY EN ...