16
ASSEMBLY
EN
Step 9
Slide reflector plate onto reflector
panels.
Insert one screw M6 X 10. Slide one
washer
Φ 6
over threaded end of
screw M6 X 10 and screw on cap nut
loosely. Repeat procedure to com-
plete the assembly of all four secti-
ons. Fully tighten all of the screws in
the rolled edge.
Step 10
Fasten the reflector with 3 pcs Large
Flat Washers and 3 pcs Wing Nuts.
II
HH
KK
GG
