- 7 -
4. Installation of the unit
4.1 Installation attention
● Avoid installations in such locations with mineral oil.
● Avoid installation in locations where air contains salt or other corrosive gas.
● Avoid installation in locations with serious power supply voltage fluctuation.
● Avoid installation in an unstable place, such as car or cabin
● Avoid installation near flammable items.
● Avoid installation in locations with strong electromagnetic wave.
● Avoid installation in locations with special harsh environmental conditions.
4.2 Installation check
● Check the model, number, name etc, avoid incorrect installation.
● Make sure enough space for installation and maintenance.
● Make sure barrier-free for air inlet and outlet, also dry ventilated place.
● Make sure the bearing surface can meet the requirement and avoid shocks.
● The power supply and its capacity, wire diameter choice should be in accordance with the electrical
installation requirements.
● Electrical installation must comply with the relevant technical standards of electrical equipment, and
electrical insulation work must be done.
● The unit must be power on for at least eight hours before running and debugging.
