Clean the door gasket
Inside
Air gap
Protect against freezing
Clean the door gasket with a damp cloth to
remove food particles regularly.
If there is an air gap installed with your
dishwasher, make sure it is clean so the
dishwasher will drain properly.
Air gap is not part of your dishwasher.
Before you clean the air gap, turn off the
dishwasher firstly and lift off the cover
Remove the plastic cap and clean with a
toothpick.
The inside of the dishwasher is self-cleaning
with normal use. If needed, clean the tub
gasket with a damp cloth and use a brush
similar to the ones shown below to clean the
opening in the end of the gasket.
Your dishwasher should be protected from
freezing properly if it was left in an unheated
place. Have a qualified person do the following:
To Disconnect Service:
1.Turn off electrical power to the dishwasher at
the supply source by moving fuses or tripping
circuit breaker.
2. Turn off the water supply.
3. Place a pan under the inlet valve. Disconnect
water line from inlet valve and drain into pan.
4.Disconnect drain line from pump and drain
water into pan.
To Restore Service:
1.Reconnect the water, drain and electrical
power supply.
2.Turn on water and electrical power supply.
3.Fill both detergent cups and run dishwasher
through a Heated-Washcycle.
4.Check connections to make sure they do not
leak.
Care & cleaning
17