LIT-210 Sunoptic Technologies
®
Rev.
(English) Date of Revision: 07/15/15
Page 4 of 8
4. BATTERY CHARGING INSTRUCTIONS
NOTES:
For optimal performance, charge the Batteries completely before initial use and
after each use. Check the status window before each use to confirm the charging
status (Figure 1). Each bar of the Battery status window represents approximately
a 20% charge.
LED Status window will show Battery status.
Each charge bay operates independently and provides simultaneous charge for
up to six Battery packs.
Figure 1: Battery with Full Charge
Figure 2: Battery Charger
1.
Place the Charger on a flat, level surface away from sources of heat and moisture.
2.
Connect the Power Supply to the mains AC supply using the cord provided.
3.
Place the Battery in the Charger bay located on the Battery Charger (see Figure 2).
4.
Align the arrows of the Battery and the Charger to ensure that the Battery makes contact
with the Charger (see figure 3).
5.
The LED status window on the Battery Charger will indicate the status of the Battery (refer
to the LED indication section for details) and the Charger will automatically begin charging.
6.
Remove the Battery when the Charger LED status window indicator is green solid.
Battery
Charge
Status
Window
Battery
Bay
LED Status
Window
Calibration
Buttons
