Dear users,
Thank you for choosing our product!
Safety Instructions
1.
As this controller deals with voltages that exceed the top limit for human safety, do not
operate it before reading this manual carefully and completing safety operation training.
2.
The controller has no internal components that need maintenance or service, thus do
not attempt to disassemble or repair the controller.
3.
Install the controller indoors, and avoid component exposure and water intrusion.
4.
During operation, the radiator may reach a very high temperature, therefore install the
controller at a place with good ventilation conditions.
5.
It's recommended that a fuse or breaker be installed outside the controller.
6.
Before installing and wiring the controller, make sure to disconnect the photovoltaic
array and the fuse or breaker close to the battery terminals.
7.
After installation, check if all connections are solid and reliable so as to avoid loose
connections that may give rise to dangers caused by heat accumulation.
Warning: means the operation in question is dangerous, and you
should get properly prepared before proceeding.
Note: means the operation in question may cause damage.
Tips: means advice or instruction for the operator.
