Sunnydaze Decor WAR-986 Owner'S Manual Download Page 4

Inspect the hose before  each use of the appliance.  If the hose shows signs  of cracks, abrasions, cuts or  damage of any kind, do not 

operate the appliance.  Fix or replace the hose as  required before using the  appliance. For assistance with  repair or replacement of 

the hose, call Bond  Manufacturing at 1-866-771-2663.  Use only replacement  parts from the manufacturer. 

WARNING ! 

* Do not light or use  gas unit if lava rocks are wet. Ensure  lava rocks are completely dry  before igniting as intense heat  could  cause the

rocks to crack. 

* Lava rocks could hit  somebody's face or eyes during  initial start of this unit, so please  keep away from the firebowl for  the first 20

minutes after it has  been ignited. 

*LP GAS WARNING:  Do not exceed 1/4" depth  of fire glass or small lava  rocks directly above burner holes.   Applying too many lava

rocks/fire glass may result in unburned gas  pooling in firebowl or firepit.   Ventilation is required to  allow fresh air into enclosure  and any 

residual gas to escape. 
*Caution: This heating item should not be used on plastic composite or artificial wood decks.

Warranty and  Installation Information: 

The Bond  warranty  will be voided by and Bond disclaims  any responsibility for  the following  actions: 

Modification of  the firebowl and/or components  including the gas valve assembly.

Use of any component  part not manufactured  or approved by Bond.

Use and  installation  other than as instructed  in this manual.

Accessories 

4

call the seller,Use only replacement parts from the manufacturer.

We  warranty  will be voided by and We disclaims  any responsibility for  the following  actions:

us.

Summary of Contents for WAR-986
















Reviews: