background image

FOR PROPANE  GAS UNITS 

*The gas pressure  regulator provided with  the propane fire bowl must be  used.

*Do not attempt to  disconnect the gas regulator  or any gas fitting while your firebowl  is in operation.

*A dented or  rusty propane cylinder may be hazardous  and should be  checked by your gas supplier prior  to use.

*Do not use a propane  cylinder with a damaged  valve and any other worn  out parts.

*Transit and store  the empty gas cylinders carefully and  properly.

*If you see, smell  or hear the hiss of escaping  gas from the propane cylinder:

1. Turn off the  gas supply and get away from the gas  cylinder and the firebowl at once.

2. Do not attempt  to correct the problem yourself.
3. Get to your gas  supplier and/or the fire department  for help.

Children and adults  should be alerted to  the hazards of high  surface temperatures and  should stay away to 

avoid burns or clothing  ignition. 

• Young children  should be carefully supervised  when they are in the area of the  appliance.

• Clothing or other  flammable materials should  not be hung from the appliance,  or placed on or near the  appliance.
• Any guard or other  protective dev

ice removed  for servicing the appliance must  be replaced prior to operating  the appliance.

• Installation and  repair should be done by a qualified  service person. The  appliance should be inspected  before use and 

at least  annually

by a qualified service  person. More frequent cleaning  may be required as necessary.  It is imperative that the  control compartment, 

burners and circulating  air passageways of  the appliance be kept clean. 

Installation and  repair should be done by a qualified  service person. The  appliance should be inspected  before use and at least

annually by a qualified  service person.

Immediately call a qualified  service technician to inspect  the appliance and to replace  any part of the control system  and any gas

control which has  been under water.

• Use only the  specific size and capacity of the  cylinder noted.

• A statement that  the LP

-gas supply cylinder to be  used must be constructed and  marked in accordance  with the specifications for LP- 

gas cylinders of the  U.S. Department of Transportation  (DOT). 

• This appliance shall  be used only outdoors in a  well

-ventilated space and shall  not be used in a building, garage  or any other enclosed

area as the instructions  state. 

•How to disconnect  a gas bottle

Turn OFF control  knob and LP cylinder valve.  Turn coupling nut counterclockwise  by hand only - do not  use tools to

disconnect.  Loosen cylinder screw beneath  bottom shelf, then lift LP  cylinder up and out of shelf.  Place dust cap on cylinder

valve outlet whenever  the cylinder is not in use.

• Storage of an appliance  indoors is permissible  only if the cylinder is disconnected  and removed from the  appliance. Cyl

inders must be

stored outdoors  in a well-ventilated area out  of reach of children. Disconnected  cylinders must have  threaded valve plugs tightly 

installed and must  not be stored in a building,  garage or any other enclosed  area. 

WARNING: Improper  installation, adjustment, alteration,  service or maintenance  can cause injury or property damage.  Refer to the 

owner’s information  manual provided with this  appliance. For assistance or  additional information consult  a qualified ins

taller, service 

agency or the gas supplier. 

• The LP

-gas supply cylinder  must be disconnected  when this appliance is not  in use

• Only cylinder marked  “propane” shall be used.

Caution: 

Only use the pressure  regulator and hose assembly  supplied with this firebowl. Replacement  pressure regulator  and hose assemblies 

must be specified . 

Summary of Contents for WAR-986
















Reviews: