Assembly:
1.
Pull the end of the hose out of the bottom of the detached bowl.
Place the hose inside the large opening in the top of the fountain
then lower the detached bowl into place.
2.
On the faceplate to the pump, turn the flow to “low”.
Attach the
hose, found inside the fountain, to the top of the pump and set
inside the bottom of the fountain.
3.
Run the power cord through the notch in the door.
4.
Turn the door to lock it in place.
5.
Unscrew the lids of the fuel reservoirs and carefully pour fuel into them. Do not get
water into fuel reservoirs. Replace the lid and place the fuel reservoirs into the
fountain.
Fuel not included.
Use torch fuel or bio ethanol fuel.
Use of any other fuel will void your warranty.
6.
Fill bottom basin with water.
7.
Light the flames (
lighter not included
).
8.
Plug into electrical outlet.
