CARE OF YOUR ARBOUR
The Montebello Arbour is made of planed pressure treated and FSC certified timber
and as such is guaranteed against rot for a minimum of 15 years. However, it
should be remembered that as a natural product, timber is subject to movement
and weathering as it seasons. It is not uncommon for small spits to occur when
drying and warping when timber is allowed to dry too rapidly. These will normally
go back when humidity rises, it is nature at work and not considered a fault.
AFTERCARE
Its colour will also change with time, A re-treatment, as required with a proprietary wood treatment is recommended.
MONTARB - 206cm [H] x 142cm [W] x 60cm [D]
MONTEBELLO ARBOUR
Self-Assembly required
Home Delivery available
(Assembly cont.)
STEP 9
Fix one of the Roof Struts (
F
) at
the join of the Curved Beams (
E
)
from the outside [plain] side using
the Finial (
G
) to form the joint as
Fig.6
and
Fig.7
.
STEP 10
Using the remaining two curved
beams fix them to the other end
of the roof strut in the same way.
STEP 11
Insert wooden dowels [
v
] into
each end of the other roof struts
(
F
) and slot them into position in
the holes along the two Curved
Roof Beams (
E
) as
Fig.8
.
STEP 12
Raise this assembly and locate
onto the tops of the posts of the
seat assembly. Insert the roof
struts between the curved beams
in the slots provided and fix the
curved beams to the top of the
post using two screws [
z
] at each
post as
Fig.9
.
Your Arbour is now completed.
Fig.6
Fig.7
Fig.8
Fig.9
x
x
x
v
v
x
z
z
E
G
G
E
E
F
F
E
F
www.grangefen.co.uk
All products and related emblems featured are
trademarks of Grange Fencing Ltd.
©2017 Grange Fencing Ltd All rights reserved.
In line with the Company’s policy of
continuous product development, the right
is reserved to change and improve product
design without prior notice.
C
O
D
E
:M
O
N
T
A
R
B
PLAN
142cm
60cm
206cm
206cm
Montebello Arbour [A5 4pg instructions] 10/5/17 17:14 Page 1