6
TROUBLE SHOOTING
Breakdown
Solution
Pedal rotation is not smooth
or stops running
1. Interlocking is usually caused by movement over
time. In this case, the heat produced by the step
resistance causes inner dish rotational delay. If you
want the pedal to be flexible to rotate, please wait
for the cylinder to cool down before use.
2. If the hydraulic cylinder is damaged, please
replace it.
Harsh noise when rotating
1. First, make sure that all bolts have been tighten.
Then add a small amount of lubricating oil to reduce
friction and noise.
No displays on the meter
1. If there is no battery installed, please open the
display table’s back cover and install the battery.
2. Electronic meter is damaged, please replace it.
3. The cable is not plugged in, please inspect it.
4. The step angle is too low, please re-adjust the
stepper angle.
Version 1.1
