8
NOTE:
1. After being inactive for 4 minutes the power to the monitor will turn off automatically.
2. This monitor uses
2 AA batteries
. If the display appears improper or becomes difficult to read,
please try installing new batteries before attempting to contact.
3. This machine contains an
Auto on/off
feature. If the belt is put into motion, or the
MODE
button is
pressed, the computer will become active, and shall remain active while either of these two things
continues to be done. However, after being inactive for 4 minutes, power (monitor), will turn off
automatically.
4.
Time
,
Distance
and
Calorie
functions can only be set one at a time. For example: if you set one
function, then proceed to set another function, the first set function will automatically be reset to
zero.
5. If the pre-set value for
STROKES
,
TIME
,
DISTANCE
or
CALORIES
counts down to zero, the
related value in function window will flash for 10 seconds to remind you, and then begin counting
upward from 0 (as long as rowing signal continues to be received).
OPERATION:
Initial Power On, full display shown for 2 seconds, (Power Supply 2 AA).
ENTER ROWING FUNCTION SETTING MODE:
Press MODE to select a function.
Press SET to set function value.
Press MODE to enter desired value.
Press RESET to reset value to 0.
SPM and TIME/500M functions cannot be set.
