Sunny SF-RB420031, User Manual

Page: 8 / 16

7
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907- 8669).
STEP 3
Connect the Pulse Extension Wire 2
(No. 65) to the Pulse Extension Wire 1
(No. 64) and connect the Sensor Wire
(No. 61) to the Sensor Extension Wire
(No. 62) . Then connect Tension Hook
(No. 60) with Tension Cable (No. 59b)
as shown in Diagram A.
Note: Make sure the Tension
Controller (No. 59a) is at the lowest
level before you connect the cable. This
ensures the wires are at their longest
point. We recommend the assistance of
a second person to help hold the
Handlebar Post (No. 4) . This will make
the connection easier when you are
attaching
Tension Hook (No. 60) to the
Tension Cable (No. 59b) .
Insert the
Handlebar Post (No. 4) into
the post of the Main Frame (No. 1) ;
secure with 4 Arc Washers (No. 19) , 4
Spring Washers (No. 26) and 4 Screws
(No. 17) using Wrench (No. 110) .
Note : Ensure that all bolts and washers
are in place and partially threaded in
before completely tightening any of
them.
STEP 4
Remove
2 Arc Washers (No. 19) , 2
Spring Washers (No. 26) and 2 Screws
(No. 17) from Handlebar Post (No. 4) with
Wrench (No. 110).
Attach the Armrest (No. 7) to the
bracket of the Handlebar Post (No. 4)
with
2 Arc Washers (No. 19) , 2 Spring
Washers (No. 26) and 2 Screws (No. 17)
that were just removed
with Wrench (No.
110) .