Sunny SF-B1110, User Manual

Page: 10 / 13

64
9L
10L
9R
10R
39 67 68
STEP 5:
WARNING! Read instructions carefully as improper assembly may cause permanent
damage to your bike.
Remove the 2 Nylon Nuts (No. 74 L/R) located on the Pedals (No. 9 L/R) . Screw
the Left Pedal (No. 9L) counter-clockwise into its corresponding Crank Shaft (No.
10L) . Once screwed in place, use the Spanner (No. 76) to hold the bolt of the pedal
then screw Nylon Nut (No. 74L) clockwise into the thread end of the Left Pedal (No.
9L) . Secure with Spanner (No. 77) .
Screw the Right Pedal (No. 9R) clockwise into its corresponding Crank Shaft (No.
10R) . Once screwed in, use Spanner (No. 76) to hold the bolt of the pedal then
screw Nylon Nut (No. 74R) counter-clockwise into the tread end of the Right Pedal
(No. 9R) . Secure with Spanner (No. 77) .
Remove the 2 Screws (No. 68) and 2 Washers (No. 67) on the Main Frame (No.
64) . Reattach the Screws (No. 68) and Washers (No. 67) back into the Main
Frame (No. 64) along with the Water Bottle Holder (No. 39) .
The assembly is now complete!
9