9
ADJUSTMENTS & USAGE GUIDE
ADJUSTING THE TENSION OF THE ELLIPTICAL
CLIMBER
Adjust the tension of the elliptical climber by rotating the
Tension Control Knob (No. C06)
clockwise
to increase
the level of resistance. Rotate the
Tension Control
Knob (No. C06)
counter-clockwise
to decrease the level
of resistance.
Tension levels are set at Level 1 being the lowest and
Level 8 being the highest.
ADJUSTING THE BALANCE OF THE ELLIPTICAL
CLIMBER
If you find that the climber is unbalanced and causes
movement, you can adjust the balance using the
Left
and Right
End Caps for Rear Stabilizer (No. C24 &
C25)
.
MOVING THE ELLIPTICAL CLIMBER
To move the elliptical climber, hold the
Upright Post
(No. A02)
and tilt it until the movable wheels located on
the
Left and Right
End Caps for Front Stabilizer (No.
C22 & C23)
touch the ground. With the wheels on the
ground, you can transport it to the desired location with
ease.
CLEANING
The elliptical climber can be cleaned with a soft, clean, and damp cloth. Do not use abrasives
or solvents on plastic parts. Please wipe your perspiration off the elliptical climber after each
use. Be careful not to get excessive moisture on the meter display panel as this might cause an
electrical hazard or meter failure.
Please keep the elliptical climber, especially the computer, out of direct sunlight to prevent
screen damage.
Please inspect all assembly bolts and pedals on the machine for proper tightness every week.
STORAGE
Store the elliptical climber in a clean and dry environment away from children.
Summary of Contents for Premium SF-E3919
Page 3: ...2 EXPLODED DIAGRAM...
Page 15: ...14...
