Sunny Health & Fitness SF-T7820, User Manual

Page: 18 / 21

18
” or the QUICK INCLINE keys to set the incline for the first segment. Press
M to enter the data.
4. The next segment will flash on the display. Repeat to set the speed and incline for the other 15 segments.
5. After the last segment is entered, the program is saved.
6. To exercise using the user program, press P to cycle select the program U01~U03 and then press key M .
Press “+” “-” to set time and then press key “START”.
PULSE FUNCTION
Hold the contact pads with your hands for 5 seconds. A heart icon will flash. Your pulse in beats per minute will be
displayed (range 50-200 bpm). This value is for reference only and cannot be used as basis for medical treatment.
BODY FAT FUNCTION
When the treadmill is stopped, press the “PROGRAM” key until select “FAT” and enter into body fat function, then
press M key to set the parameter.
1. Press M, the window will show F1, for Sex. Number 01 is for male and number 02 is
for female. Press “+” “-”
to set the sex.
2. Press M the window will show F2
, for Age. The default age is 25. Press “+” “-” to set age. The range is 1-99.
3. Press M , the window will show F3
, for Height. The default height is 67 inches. Press key “+” “-” to set height,
the range is 39-87 inches.
4. Press M , the window will show F4
, for Weight. The default weight is 154 pounds. Press key “+” “-” to set the
weight. The range is 44-330 pounds.
5. Press M , the window will show F5
, for Body Fat and enter body fat function. When the window shows “------”,
put your two hands on the handle bar and wait for 8 seconds. The window will show the BMI data.
SAFETY KEY FUNCTION:
When you pull off the safety
key, the TIME window displays “E07” and buzzer will sound three times. If the treadmill
is running, it will stop at once and all console keys will lock.
Put the safety key on the magnet, the display will light for 2 seconds, then go to the default working mode. All date will
be cleared and default data will be shown. Treadmill will be in manual mode P0.
POWER SAVING FUNCTION
When the treadmill has been idle for 4.5 minutes, it will enter power saving mode. While the treadmill is in this mode,
the window display of the console will be turned off. To turn treadmill back on, press any button for 3 seconds.
To turn off the power saving function, press M for 3 seconds. The console will display “2222”
To turn on the power saving function, press M for 3 seconds.
The console will display “1111”.