background image

 

IMPORTANT SAFETY INSTRUCTION 

 

When using an electrical appliance, basic precautions should always be followed, including the following: 
 
Read all instructions before using this treadmill. 
 

DANGER

 

– To reduce the risk of electric shock: 

1.  Always unplug this treadmill from the electrical outlet immediately after using and before cleaning. 

 

WARNING

 – To reduce the risk of burns, fire, electric shock, or injury to persons: 

1.  The treadmill should never be left unattended when plugged in. Unplug from outlet when not in use 

and before putting on or taking off parts. 

2.  Do not operate under  a  blanket or pillow. Excessive heating can occur and cause fire, electric 

shock, or injury to persons. 

3.  Close supervision is necessary when this treadmill is used by, on, or near children or disabled 

persons. 

4.  Use this treadmill only for its intended use as described in this manual. Do not use attachments not 

recommended by the manufacturer. 

5.  Never operate this treadmill if it has a damaged cord or plug, if it is not working properly, if it has 

been dropped or damaged, or dropped into water. Return the treadmill to a service center for 
examination and repair. 

6.  Do not carry this treadmill by power cord or use cord as a handle. 
7.  Keep the cord away from heated surfaces. 
8.  Never operate the treadmill with the air openings blocked. Keep the air openings free of lint, hair, 

and alike items. 

9.  Never drop or insert any object into any opening. 
10. Do not use outdoors. 
11. Do not operate where aerosol (spray) products are being used or where oxygen is being 

administered. 

12. To  disconnect, turn the treadmill off, then remove plug from outlet. 
13. Connect this treadmill to  a  properly grounded outlet only. See grounding instructions. 

 

CAUTION

:

  

1. To avoid injury, use extreme caution when stepping onto or off  a moving belt. Read instruction 
manual before using. 
 
 

SAVE THESE INSTRUCTIONS 
 
 
 

 

 

 

 

 

Summary of Contents for SF-T7603

























Reviews: