8
ADJUSTMENT INSTRUCTIONS
3
HOW TO FOLD THE BIKE
Pull out
Locking Pin (No. 12)
. Fold the bike. Insert
Locking Pin (No. 12)
into position
B
.
HOW TO ADJUST THE RESISTANCE
To ensure smooth and efficient cycling motions, the
belt tension braking system on your folding recumbent
bike has been pre-tensioned by our factory during
production.
To adjust the tension during use, turn the
Tension
Control Knob (No. 11) clockwise
to increase the
tension. Turn the
Tension Control Knob (No. 11)
counter-clockwise
to decrease the level of tension.
HOW TO ADJUST THE BALANCE
For security and stability, your folding recumbent bike
has a factory welded frame and once properly
assembled, should not need further alignment.
However, in the interest of safety, please always
ensure it is positioned on a solid, flat surface.
If necessary, use a rubber mat underneath to reduce
the possibility of slipping while in use.
If you need to adjust in order to level your bike, simply
turn the end of the
Adjustable End Caps (No. 3a)
on
the
Rear Stabilizer (No. 3)
to compensate for uneven
floors.
HOW TO MOVE THE BIKE
The
Front End Caps (No. 4a)
have wheels. When the
bike is folded, hold the
Handlebars (No. 9)
and tilt the
bike forward. You can transport the bike to the desired
location.
9
