Sunny Health & Fitness SF-E3875, User Manual

Page: 6 / 18

5
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at
support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-
8669).
STEP 1:
Remove the preassembled 4 Inner Hex
Cylinder Head Bolts (No. 16) , 4 Small
Flat Washers (No. 14) , 2 Inner Hex
Cylinder Head Bolts (No. 17) and 2 Curve
Washers (No. 18) from the Base Frame
(No. 2) . Attach the Main Frame (No. 1) to
the Base Frame (No. 2) with 4 Inner Hex
Cylinder Head Bolts (No. 16) , 4 Small
Flat Washers (No. 14) , 2 Inner Hex
Cylinder Head Bolts (No. 17) and 2 Curve
Washers (No. 18) that were just removed.
Tighten and secure with Allen Wrench (No.
86) .
Remove the preassembled 2 Inner Hex
Pan Head Bolts (No. 47) , 2 Limited
Bushings (No. 48) and 2 Cap Nuts (No.
49) from the Wheel Frames (No. 4L/R).
Move the Left Wheel Frame (No. 4L) so
the hole on the metal plate is lower than the
Base Frame (No. 2) . See Fig A. Insert
Inner Hex Pan Head Bolt (No. 47) through
Limited Bushing (No. 48) and the hole in
the metal plate of the Wheel Frame (No.
4L) . Screw Cap Nut (No. 49) onto the end
of Inner Hex Pan Head Bolt (No. 47) . See
Fig B. Tighten with Allen Wrench (No. 87)
and Spanner (No. 89) .
Repeat to attach the Right Wheel Frame
(No. 4R) to the Base Frame (No. 2) .
Fig A
Fig B