12
2.When Calories is 5~9995, it will
count down to 0.
Watt
Age
45~250
10~99
100
30
±5
±1
User can set watt value only in the
Watt Control Program.
Target HR will be based on Age.
When Heart Rate exceeds Target
HR, the Heart Rate number will
flash.
Pulse
60~220
90
±1
Setting Parameters for Target heart
rate.
PROGRAM OPERATION:
Manual (P1)
Program profile
SETTING PARAMETERS FOR MANUAL PROGRAM
1. Select
Manual Program (P1)
using the UP or DOWN button, then press ENTER.
2. TIME will flash so the value can be adjusted using the UP or DOWN button.
3. Press the ENTER button to save the value and move to the next parameter to be adjusted.
Note: If you set up the target time to workout, then the next parameter of Distance
cannot be adjusted.
4. Continue through all desired parameters, and press the START/STOP button to begin the
workout.
Note: Once the workout parameter counts down to zero, it will beep and stop the
workout automatically. Press the START button
to continue the workout to reach the
unfinished workout parameter.
Pre-set programs (P2~P13)
Program profile
Summary of Contents for SF-E3875
Page 3: ...2 EXPLODED DIAGRAM ...
