Sunny Health & Fitness SF-E3607, User Manual

Page: 8 / 12

7
STEP 4:
Attach the 2 Pedals (10L/R) to the
corresponding 2 Pedal Supports (No.
5L/R) with 4 Hex Bolts (No. 33) , 4 Flat
Washers (No. 34) and 4 Nylon Nuts
(No. 35) using Spanner (No. 102) .
NOTE: There are 3 positions on the
Pedal Support (No. 5L/R) , numbered
1,2, and 3, that you can install the
Pedals (No. 10R/L) . Adjust the pedal
position to suit your comfort level. Make
sure both
Left and Right Pedals (No. 10
L/R) are set at the same position
numbers.
STEP 5:
Insert the Pulse Wire (No. 50) through
the hole of Handlebar Post (No. 2) then
pull it out from the hole of computer
bracket at the top of the
Handlebar Post
(No. 2) .
Remove pre-assembled 2
Inner Hex
Bolts (No. 51) and 2 Spring Washers
(No. 52) from the Handlebar (No. 8) first.
Fix Handlebar (No. 8) onto the
Handlebar Post (No. 2) with 2 Inner
Hex Bolts (No. 51) and 2 Spring
Washers (No. 52) that were removed
using Wrench (No. 100) . Lastly, put on
the Clamp Cover (No. 53) .
Removed pre-assembled 4
Inner Hex
Bolts (No. 16) , 4 Spring Washers (No.
52) and 4 Arc Washers (No. 44) from
the Swing Tubes (No. 6L/R). Attach the
2 Handlebars (No. 7L/R) to the
corresponding Swing Tubes (No. 6L/R)
and secure them with 4 Inner Hex
Bolts (No. 16) , 4 Spring Washers (No.
52) and 4 Arc Washers (No. 44) using
Wrench (No. 100) .