5
STEP: 2
Secure
Washers (No. 13)
onto
Bolts (No. 9)
.
Place the
Support Plate (No. 16)
against the
Stabilizer (No. 2)
and align the holes.
Next, insert
Bolts (No. 9)
containing
Washers (No. 13)
through the
Support Plate (No.
16)
and
Stabilizer (No. 2)
(as shown above in the diagram).
Place the
Stabilizer (No. 2)
against the
Main Frame (No. 1)
, align the holes and fix the
stabilizer to the main frame using 2
Bolts (No. 9)
, 2
Washers (No. 13)
and 2
Nuts (No.
15)
. Tighten and secure with
Spanner Wrench
.
NOTE:
Four
Washers (No. 13)
are required to secure one
Stabilizer (No. 2)
to the
Main Frame (No. 1)
.
Repeat this process to connect the stabilizer to the main frame on the opposite side.
