background image

 

BATTERY INSTALLATION & REPLACEMENT 

 

 

 

 

 

 

 

 

 

 

 

BATTERY INSTALLATION:

   

1. Take out 2 AAA battery from meter box. 
2. Press the buckle of battery cover on the 

Meter (No. 38)

, then remove battery cover. 

3. Install 2 AAA battery into the battery case on the back of the 

Meter (No. 38)

. Pay attention to the 

b and – ends before installing. 

4. Press the buckle of battery cover, then put the battery cover back to the back of the 

Meter (No. 

38)

 
The installation is complete!   

 

BATTERY REPLACEMENT:   
 

1. Press the buckle of battery cover on the back of the

 Meter (No. 38)

, then remove battery cover.

 

2. Remove the 2 old AAA battery in the battery case and install 2 new AAA battery into the battery 

case  on  the  back  of  the 

Meter  (No.  38)

.  Pay  attention  to  the  battery  +  and  –  ends  before 

installing.

 

3. Press the buckle of battery cover, then put the battery cover back to the back of the 

Meter (No. 

38)

.

 

 
The replacement is complete! 

 

NOTE: 

Always change both batteries at the same time. Do not mix battery types and do not mix old 

and new batteries. Dispose batteries according to your state and regional guidelines. 

 

 

 

 
 
 
 
 
 

Battery

Battery Cover

Summary of Contents for SF-A022005















Reviews: