4
ASSEMBLY INSTRUCTIONS
STEP 1:
Remove the
Main Frame (No. 10)
from the box. Lift both
Pedals (No. 16)
Cable
(No. 13)
all the way up and secure the
Pulley (No. 11)
in place by slightly pushing forward. Next, hook the
Pedals (No. 16)
to the groove of
Pulley (No. 11)
and push the
back down. Secure the
Adjustment Knob
(No. 9)
onto the
Main Frame (No. 10)
by tightening.
NOTE:
The
Adjustment Knob (No. 9)
is used to adjust
stepping height.
STEP 2:
Disconnect the
Connecting Wire (No. 1b)
from the
Meter
Wire (No. 1a)
. Attach the twist tie provided to the
Connecting Wire (No. 1b)
. With the
Connecting Wire
(No. 1b)
attached, use the twist tie to insert the
Connecting
Wire (No. 1b)
through the
Bottom Stand Post (No. 7)
.
11
13
16
9
10
1a
1b
7
Twist Tie
