6F, NO.76, ZHOU
Q7. How do I select Lens Holder?
The lens holder screw hole spacing is 20mm. Please refer to the figure below for the
holder size (inner & outer) (length 19.7~14mm: width 18.8~13mm)
Q8. If I want to use CS mount lens,
Use CS mount lens holder, please refer to the follow figure.
Q9. The connection method for the power/video port?
Please refer to the "power/video port" section.
Q10. How to select IR LED?
Please use the IRLED with peak wavelength at
Q11. The effect of IRLED is not obvious?
(1) Your must use D/N type module (with D&N OLPF attached on the sensor)
(2 )Your IRLED peak wavelength must be 850nm
SC-40X / SW-41X
USER MANUAL
13
6F, NO.76, ZHOU-Z ST., 114 NAI-HU, TAIPEI, TAIWAN
886-02-8797-3566
Q7. How do I select Lens Holder?
The lens holder screw hole spacing is 20mm. Please refer to the figure below for the
holder size (inner & outer) (length 19.7~14mm: width 18.8~13mm)
Q8. If I want to use CS mount lens, what should I do?
Use CS mount lens holder, please refer to the follow figure.
Q9. The connection method for the power/video port?
Please refer to the "power/video port" section.
Please use the IRLED with peak wavelength at around 850nm.
Q11. The effect of IRLED is not obvious?
(1) Your must use D/N type module (with D&N OLPF attached on the sensor)
Your IRLED peak wavelength must be 850nm
USER MANUAL
SC-40X / SW-41X
2013/10/4
HU, TAIPEI, TAIWAN
The lens holder screw hole spacing is 20mm. Please refer to the figure below for the
holder size (inner & outer) (length 19.7~14mm: width 18.8~13mm)
(1) Your must use D/N type module (with D&N OLPF attached on the sensor)