6F, NO.76, ZHOU
Q&A
Q1. How to effectively make Day & Night module into Day Module ?
Use Lens with IR Coating to block the Infrared light.
Q2. How to enlarge 32x32 size PCB to 38x38 size ?
Use 32 to 38 conversion frame.
Q3. Issue on blurred image or poor image resolution
Check if the surface of the sensor or the top & bottom side of the lens
contaminated, use micro-
Also it could be image out of focus, please adjust the focus of the lens.
Q4. Can not achieve the best focus
Change the height of the lens holder if focus can not be met.
Adjust the lens to make it closer to the sensor, if you still see the blurred image,
please change a lower height lens holder.
Adjust the lens to make it far away from the sensor, if you still see the blurred image,
please change a higher height lens holder.
Q5. Why the color I see on the TV seem not to be correct?
For some circumstances (light source include IR), the color of the object might be
influenced by the IR.
Q6. How do I deal with color rolling?
Please select modules with
SC-40X / SW-41X
USER MANUAL
12
6F, NO.76, ZHOU-Z ST., 114 NAI-HU, TAIPEI, TAIWAN
886-02-8797-3566
Q1. How to effectively make Day & Night module into Day Module ?
with IR Coating to block the Infrared light.
Q2. How to enlarge 32x32 size PCB to 38x38 size ?
Use 32 to 38 conversion frame.
Q3. Issue on blurred image or poor image resolution
Check if the surface of the sensor or the top & bottom side of the lens
-denier to clean all the contaminants if necessary.
Also it could be image out of focus, please adjust the focus of the lens.
Q4. Can not achieve the best focus
Change the height of the lens holder if focus can not be met.
t the lens to make it closer to the sensor, if you still see the blurred image,
please change a lower height lens holder.
Adjust the lens to make it far away from the sensor, if you still see the blurred image,
please change a higher height lens holder.
5. Why the color I see on the TV seem not to be correct?
For some circumstances (light source include IR), the color of the object might be
Q6. How do I deal with color rolling?
with auto iris function and use direct drive type auto iris lens.
USER MANUAL
SC-40X / SW-41X
2013/10/4
HU, TAIPEI, TAIWAN
Check if the surface of the sensor or the top & bottom side of the lens are
denier to clean all the contaminants if necessary.
Also it could be image out of focus, please adjust the focus of the lens.
t the lens to make it closer to the sensor, if you still see the blurred image,
Adjust the lens to make it far away from the sensor, if you still see the blurred image,
For some circumstances (light source include IR), the color of the object might be
irect drive type auto iris lens.