SMR Pitched Roof System
33
of
48
Flashing Installation
L-Foot Attachment
Rail Attachment
For curved tiled roofs hand form the flashing to
match the tile contour. Install flashing over
Stanchion and under the edge of the tile located
above.
Loosely install the L-Foot Adaptor to the L-Foot
using the M8 Bolt provided.
Install the Rail onto the L-Foot and L-Foot
Adaptor. Confirm that the hooks on the L-Foot
Adaptor are fully engaged with the hooks on the
side of the Rail.
Adjust the Rail to the desired height and then
secure the Rail to the L-Foot Adaptor using the
M8 Bolt; use a 6mm hex driver and torque to
13Nm (10 ft-lbs).
Install the L-Foot with its M8 Bolt onto the top of
the stanchion; use a 6mm hex driver and torque
to 13Nm (10 ft-lbs).