CONNECTING TO POOL
Solar valve
Auxiliary
heater
Filtration
pump
Suction
(cold water)
Return
(Hot water)
Filter
SWIMMING POOL
Fig. 3a-2
Fig. 3a-3
Fig. 3a-1
Fig. 3a-4
Fig 3a-5
Put "O" rings (
SK-FTG-I
) on both threaded caps (
SK-FTG-F)
See Fig 3a-1
Apply Teflon tape to threads of all 2 caps (
SK-FTG-F)
See Fig 3a-2
Thread all 2 caps into the panels as per Diagram Step 3a. Do not over
tighten. See Fig 3a-3
Push the hose (
SK-FTG-J
) over the panel header as per Diagram Step 3a.
Slide a metal collar (
SK-FTG-L
) onto the hose. Place metal collar from edge
and tighten collar with screwdriver. See Fig 3a-4.
Slide another metal collar onto the hose. Connect the 2 panels together by
pushing the rubber hose over the second panel header. Tighten metal collar
to secure assembly. See Fig 3a-5
Note: Without a diverter, your solar heating system is always ON. At night, your solar panels will cool your
swimming pool.
We recommend you close your pump at night to avoid this or purchase a diverter kit (SOL-DK)
C A L E N T A D O R E S S O L A R E S
