background image

 

 

USE & CARE 

1. This Gazebo is not a permanent structure and should be disassembled & stored away after 

use. 

2. Do not repack your gazebo until completely dry. 

3. This Gazebo must not be left erect in windy conditions. 

 

WARNINGS 

1. Assembly Instructions must be followed. 

2. Stakes supplied must be used to hold this gazebo in place when upright. 

3. Warranty does not cover damage due to extreme weather conditions. 

 

CUSTOMER SERVICE 

Sunjoy Industries warrants to the original purchaser that this item is free from defects in 

workmanship and materials of your item provided the item was factory-sealed at the time of 

purchase and is maintained with care and used only for personal, residential purposes. The 

item is warranted to be free from defects in material or workmanship for a period of 

6 months

Should any manufacturing defect arise within this warranty period, Sunjoy Industries will repair 

or replace (at our option) any defective merchandise upon proof of purchase; however, 

transportation and delivery costs, as well as labor and material charges to remove or 

replace parts, remain the responsibility of the purchaser. A purchaser of an "open box," 

previously-returned, or "clearance" item, as well as original purchasers outside of the warranty 

period, may obtain replacement parts from Sunjoy Industries for products in current production, 

at nominal cost. 

If you are within the return policy that most stores have, you do have the option of returning 

this item back to the store which you bought it from for an exchange of the same item, or a 

refund of the purchase. 

If you are within or beyond the return policy that most stores have, and need tech. assistance 

or replacement parts, please call Sunjoy Industries at 1(866) 578-6569 from 8:30 am to 5:30 

pm eastern standard time or e-mail to 

[email protected] 

or fax your parts replacement 

order form together with the purchase receipt to 1 (740) 283-3549 for assistance.

 

 

Fig.18:

 Attach the mosquito netting (R) 

and privacy panel (S) to mosquito 

netting pipe (L2) & (L1). 

Fig.19:

  Fix  the assembled gazebo to the 

ground by stake (FF). 

Summary of Contents for Somerset









Reviews: