PART 2: POLE AND FENCE ASSEMBLY
NOTE: The Bottom Poles (A) must be orientated so that holes to attach Side Rails (C1 & C2) face each other.
UP
Fig.5
Fig.6
Step 1: Assembly Upper Poles to Dome
( 8 people are needed for this step)
Four people hold the 4 Upper Pole (B) in vertical position and
using 4 people lift assembled dome over 4 poles. Insert the
Upper pole (B) pre-attached bolt into the Top Rail (D2) and
attach with Flat washer (e) and Nut (d). Secure the Upper Pole
(B) with 4 Flat Washers (c) and 4 Bolts (a). See. Fig. 4. Repeat
for remaining 3 Upper Poles (B). Fully tighten hardware.
Step 2: Assembly of Upper Poles to Bottom Poles
( 8 people are needed for this step)
Four people hold the 4 Bottom Poles (A) in vertical direction
and the other 4 people lift the assembled Upper Poles (B)
and the dome. Attach Bottom Pole (A) to Upper Pole (B) with
Bolts (a) and Flat Washer (c). See Fig. 5. Repeat for remaining
3 Bottom Poles (A). Fully tighten hardware.
Step 3: Assembly of Side Rails
Attach Side Rail (C1) to Side Rail (C2) with Bolts (a), Flat
Washers (c) and Acorn Nuts (b). See Fig. 6. Note: The side
with UP arrow should be on the top during assembly. Note
direction of decorative curls are facing opposite of each other.
Fig. 4
