background image

 

Garden Pavilion 

ITM./ART. 428992 

Assembly Instructions 

L-PG050PST 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For technical assistance or replacement parts call Sunjoy Monday through Friday from 8:30am to 5:30pm ET.

   

US: 1-866-578-0101 Canada: 1-866-532-9557 (English and French) or email [email protected]

 
NOTE: 

Please read instructions prior to assembly. It is recommended to use 8 people for assembly. 

z

 

When assembling and using this product, basic safety precautions should always be followed to reduce the 
risk of personal injury and damage to equipment. 

z

 

For outdoor use only.   

z

 

Keep instructions for future reference. 

z

 

Ground stakes are included for use on dirt and grass. 

z

 

Check all bolts for tightness before and during usage. 

 
WARNING

: Assemble as per instructions only. Do not alter the construction of the pavilion. Children and pets 

should be supervised when they are in area of the pavilion. 
 

Notes before assembly:  

Permanent installation recommended. For ease of cleaning and safety, do not 

assemble less than 6 ft / 1.8 m from any obstruction such as a fence, garage, house, overhanging branches, 
laundry line or electrical wires. Install on level ground. To ensure safe use of this pavilion, it may be necessary 
to install the pavilion permanently into poured concrete blocks or railroad ties or similar using suitable bolts. 
Consult a qualified contractor or representative at your local hardware store or home center. 
 
Please check your local regulations prior to permanently installing this item. Some municipalities have 
restrictions and requirements. 
 
 
 

Summary of Contents for L-PG050PST







Reviews: