Fig.19: Insert the plates (L1, L2 and L3) into the lower of the PCs; then secure the center plate (O1) to the middle beam (I)
through three holes with screws (EE) and flat washers (BB).
Fig.20: Secure the corner plate (O2) to the slanting beam (H) through three holes by using screws (EE) and flat washers (BB).
Part
Description
Quantity
Image
GG
Ring
56 PCS
HH
Φ
8 X 180 mm Stake
16 PCS
Fig.21: Attach the mosquito netting (V) to the long netting
tubes (T) and short tubes (U) with rings (GG).
Fig.22: Secure the whole gazebo to the ground with stakes
(HH).
Fig.17: Insert the short PC 1 and 2 (J3 and J4) into the middle beam (I) and slanted beam (H), then insert the rails (N1 and
N2) into it. Insert the long PC (J1) into the middle beam (I) and slanted beam (H). Repeat this step to install the right PCs.
Fig.18: Insert the middle PC (J5) into the middle beam (I); then insert the middle rail (N3) into it. Insert the middle PC (J5)
into middle beam (I).
Hardware Pack 4
