`
Fig.1: Secure the small panels (B1 and B2) to the large panels (A1 and A2) with bolts (AA) and flat washers (BB).
Fig.2: Secure the lower connector 1 (E) to the corner of the panels with bolts (CC) and flat washers (BB).
Fig.3: Insert the long beam 1 into the long beam 2 (C2), then secure the lower connector 2 (F) to long beam 1 (C1) and long
beam 2 (C2) with bolts (CC) and flat washers (BB). Reserve one hole on the long beam (C2) to install the netting tube.
Fig.4: Secure the assembled long beam 1 to the large panels (A1 and A2) with bolts (CC) and flat washers (BB).
Repeat this step to secure the short beam (D) to small panels (B1 and B2).
Fig.5: Secure the lower connector 2 (F) and short netting tube (U) to the short beam (D) with bolts (CC) and flat
washers (BB).
Fig.6: Secure the long netting tubes (T) to the long beams (C1 and C2) with bolts (CC) and flat washers (BB). Repeat
this step to secure the short netting tubes.
