Step 4:
Attach Corner Connector C to Corner Peak Girder G, tighten with bolts CC, flat washer BB and bolt
DD. Attach the other end of Corner Peak Girder G to top frame D, tighten with bolts AA, flat washer BB
(Fig.4-1/4-2)
Step 5
: Attach one end of Middle Peak Girder F to Top frame D and the other end to the connection of
Decorative Top Bar A and B. (Fig 5-1/5-2)
Step 1:
Insert the end with connection tube of Decorative Top Bar B into Decorative Top Bar A; tighten
with Bolts AA and Flat Washers BB (Fig 1)
Step 2:
Attach Corner Connector C to Decorative Top Bar A and B using Bolts AA and Flat Washer BB
˄
Fig 2
˅
Step 3:
Insert tube on Top Frame D to inner tube of another top frame D, tighten with bolts AA and flat
washer BB (Fig 3)
Step 6
: Attach Planter Hook J to Connection of Small Peak I, attach Small Peak Girder H to
Connection of Small Peak, and tighten with Bolts CC, Flat Washer BB and Nut EE. (Fig 6)
Step.7
: Put the Big Canopy S over the assembled top portion, but do not fully extend, insert Small
Peak Girder H into Connection of Small Peak I
ˈ
tighten with Bolts AA and Flat Washer BB .(Fig 7)
