Fig.8
: Put Canopy for the second roof (3A) onto top
roof. Do not complete it here in order to
assemble the second roof.
Fig.9
:
Insert Small Top Pole (3C) into Top Connector (3B), then use screws CC, washers BB and nuts DD to secure 3C
and bars on the second roof.
Fig.11
: Complete fitting Canopy (3A).
Fig.12
: Hang the mosquito netting onto the outside tracking pipe by
using Plastic Ring (3E1).
Note
: The inside tracking pipe is for hanging privacy panels use.
Privacy panels are sold separately.
STEP #3
Top roof, canopy and mosquito net
(x 4)
(CC)
(x 4)
(BB)
(x 4)
(DD)
Fig.10
:
Complete fitting Canopy for top roof (3D).
