background image

 

Care & Maintenance 

Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from 

rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings 

are scratched. This is a natural process and is not a defect! To minimize this condition, we recommend care when 

assembling  &  handling  the  product  to prevent  scratching  the  paint.  Should  any  scratching  or  damage  occur,  we 

recommend immediate touch-up with rust inhibiting paint, which is included in the package. Surface rust can also 

be easily removed with a very light application of common cooking oil. If surface oxidation (rusting) occurs and if no 

measure is taken to prevent this, the oxidation may start dripping on to deck or patio and cause damaging stains, 

which may be difficult to remove. This can be prevented if the measure is taken to keep the product from oxidizing. 

 

Limited Warranty 

The  item  is  warranted  to  be  free  from  defects  in  material  or  workmanship  for  a  period  of  1  year.  However,  we 

don't reimburse  for  transportation  or  delivery costs, or  compensate  the  individual  or  any  outside  party  for 

assembling or disassembling the product. 

 

This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of 

your item, provided the item is maintained with care and used only for personal, residential purposes.   

 
Exclusions 

Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature, 

vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered.   Proof 

of  purchase  (dated  register  receipt)  is  required  for  warranty  claims. Warranty  is  to  the  original  purchaser  and  is 

non-transferable. Any replacement of warranted items will be in the original style and color, or a similar style and 

color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations 

on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, 

and you may also have other rights, which vary from state to state. 

 

Important 

Please  do  not  return  this  product  to  the  store.  For  technical  assistance  on  assembly  or  replacement  parts,  call 

Sunjoy  Industries  at  (866)  578-6569  from  8:30  AM  to  5:30  PM  EST  Monday  to  Friday;  or

 

For  expedited 

replacement parts order, fax the attached completed customer service replacement form to 740 283 3549; or email 

[email protected]

 for assistance 

 

 

 

 

 

 

 

 

Summary of Contents for L-GZ120PST-3








Reviews: