Sunjoy L-DN1856SST-E-T, Assembly Instruction Manual

Page: 3 / 15

3 of 15
SPECIFICATION
IMPORTANT SAFETY INFORMATION AND PRECAUTION

When the appliance is for connection to a fixed piping system, the installation must conform with
local codes, or in the absences of local codes with the National Fuel Gas Code, ANSI Z223.1 /NFPA54;
International Fuel Gas Code, Natural Gas and Propane Installation Code, CSA B149.1; or Propane
Storage and Handling Code, B149.2, as applicable.

The LP gas supply cylinder to be used must be:
1- Constructed and marked in accordance with the U.S. Department of Transportation (D.O.T.)
Specifications for LP-Gas Cylinders, or the Standard for Cylinders, Spheres and Tubes for
transportation of Dangerous Goods and Commission, CAN/CSA-B339 as applicable;
2- Provided with a listed overfilling prevention device;
3- Provided with a cylinder connection device compatible with the connection for the appliance.

Always place the appliance on a firm and level surface.

Solid fuels shall not be burned in this gas appliance. When using decorative Lava Rocks, use only
Lava rocks. (INCLUDED).

The appliance shall be used only outdoors in a well-ventilated space and shall not be used in a
building, garage or any other enclosed area.

When in use, keep the appliance area clear and at least 40 in / 101.6 cm side clearance from
combustible materials, gasoline and other flammable liquid and vapors. Do not use the appliance
under overhead combustible surfaces. Certain items or materials, when stored under the appliance or
nearby, will be subjected to radiant heat and could be damaged.

Open the door and inspect the hose assembly and burner prior to each use. If there is evidence of
excessive abrasion or wear or if the hose or burner is damaged, it must be replaced by appropriate
part from the manufacturer.
Product name
Stoneridge Rectangular Fire Pit Table
Model NO.
L-DN1856SST-E-T
Rated Heat Output 30,000BTU/HR
Fuel Propane-LP
Gas Supply 20 lb. LP-Gas cylinder
Manifold Pressure 11 Inches W.C.
Orifice Size (diameter) 1.74mm
Gas Supply Pressure Max.250 PSI