Step 6.
Insert another end of top pole (E) to the corner connector that welded on connect pole (C), make sure the
snap link of corner connector is locked into top pole (E) (Fig. 11 & Fig. 12). Repeat this step for remaining three top
poles (E).
Step 7.
Fit canopy (I) over the assembled gazebo skeleton; attach Velcro straps on the inside of canopy (I) to
connecting poles (C&D) (Fig. 13). Your inner side of assembled canopy top should like figure 14.
Step8.
Put 4 pieces of brackets (G) onto the corner of screens (A&B) (Fig. 15). Secure gazebo to the ground with
pegs (K).
Step9.
Hang mosquito net (J) on the connecting poles (C&D) and fix it by Velcro straps when use.
