Sunjoy D-GZ942PST Assembly Instructions Manual Download

Page: 5 / 7

Hardware Pack 3

Fig.12:

Insert the Small top slanting bar (K) to the Small top connector (L), then attach the Hook (M)

into the Small top connector (L), put the Large canopy(R) into the large top without spread
out.

Fig.13:

Insert the lower end of the assembled Small top slanting bar (K) into the tube of the Slanting

bar (I).

Fig.14:

Put the Small canopy (Q) into the small top, make the small canopy tightly attached to the

Small top slanting bar (K).

Fig.15:

Attach the Finial (N) to the top of the Small top connector (L).

180*

￠

“

”

Stake

16 PCS

Mosquito ring

60 PCS

Summary of Contents for D-GZ942PST

Page 2: ...r tube of slanting bar E 8 Lower tube of middle bar F 4 Slanting bar G 8 Middle bar H 4 Upper tube of slanting bar I 4 Large top connector J 1 Small top slanting bar K 4 Small top connector L 1 Hook M 1 Finial N 1 Shelf O 4 Middle beam lower connector P 4 Large canopy Q 1 Small canopy R 1 Mosquito netting S 1 ...

Page 3: ... 3 Insert the assembled Cross beam in to the Small panel B1 B2 Fig 1 Attach the Small panel B2 to the Big panel A by using the Bolt AA and Washer BB Attach the Small panel B1 to the Big panel A by the same way Hardware Pack 1 AA M6 25 Bolt 24 PCS BB M6 Washer 24PCS Z M6 Wrench 1 PCS ...

Page 5: ... the large top without spread out Fig 13 Insert the lower end of the assembled Small top slanting bar K into the tube of the Slanting bar I Fig 14 Put the Small canopy Q into the small top make the small canopy tightly attached to the Small top slanting bar K Fig 15 Attach the Finial N to the top of the Small top connector L FF 180 6 7 Stake 16 PCS GG Mosquito ring 60 PCS ...