4
/
7
Hardware Pack 2
Fig.4:
Insert the Slanting bar (G) into the Lower tube of the slanting bar (E)
.
Fig.5:
Insert the upper end of the Slanting bar (G) into the Upper tube of the slanting bar (I).
Fig.6:
Insert the upper end of the Upper tube of the slanting bar (I) into the tube of the Large top connector (J).
Fig.7:
Attach the assembled slanting bar into the Big panel (E) by inserting the Lower tube of the slanting bar
(E) into the pentagon tube of the Big panel (A).
BB
M6 Washer
16 PCS
CC
M6*15 Bolt
8 PCS
DD
M6*35 Bolt
4 PCS
EE
M6 Nut
4 PCS
Fig.8:
Attach the
Middle beam lower connector (P) to the Cross beam (C) by using Bolt (CC) and Washer (BB).
Fig.9:
Insert the Middle bar
(H) into the
Lower tube of middle bar
(F).
Fig.10:
Insert the upper end of the Middle bar (H) into the tube of the Large top connector (J).
Fig.11:
Attach the
Lower tube of middle bar
(F) of the assembled middle beam to the Middle beam lower
connector (P) by using Bolt (DD), Washer (BB) and Nut (EE).