Assembly Step
Fig.1: Insert both ends of short support pipe (4) into long support pipe (3), and then insert another
end of long support pipe (3) into pipe connector (B), with gradient circular tube upwards.
Fig.2: Insert one end with contracted pipe of top short pipe (5) into top long pipe (6), then insert top
long pipe (6) into big top connector (C), put big canopy (E) onto frame before installing fourth top
long pipe (6), do not spread out. Insert fourth top long pipe (6) into big top connector (C). (See next
step diagram).
Fig.3: Insert another end of top short pipe (5) into pipe connector (B). Put small canopy (D). (See
next step diagram)
