Fig.1:
Insert decorative slot (E1 & E3) into decorative slot (E2 & E4), tighten by bolt (AA) and washer (BB).
Fig.2:
Attach Bean Connector (I2) to the middle of decorative slot 3 (E3) and decorative slot 4 (E4) by bolt (AA)
and washer (BB).
Fig.2-1:
Attach
Bean Connector (I2) to decorative slot (E1 & E2) by bolt (AA) and washer (BB).
Fig.3:
Firstly, insert assembled decorative slot without corner into decorative slot with corner, then fix the top
slanting bar connector (I1) at the corner of decorative slot, secure them with blot (AA) and washer (BB).
Fig.4:
Attach corner support (F) to the corner of the decorative slot by bolt (AA) and washer (BB).
Fig.5:
Attach long mosquito netting pipe (O1) to the long decorative slot by bolt (CC) and washer (BB).
Fig.5-1:
Attach short mosquito netting pipe (O2) to the short decorative slot by bolt (CC) and washer (BB).
Fig.6:
Attach hook (N) to Bottom top roof (L2).
Fig.7:
Attach one end of Top Slanting Bar (J2) to Slanting Bar
Connector
(I1) by bolt (AA) and washer (BB).
Fig.7-1:
Attach the other end of Top Slanting Bar (J2) to Bottom top roof (L2) by bolt (AA) and washer (BB).
Fig.8:
Attach one end of Top Bar (J1) to Bean
Connector
(I2) by bolt (AA) and washer (BB).
Fig.8-1:
Attach the other end of Top Bar (J1) to Bottom top roof (L2) by bolt (AA) and washer (BB).
Fig.9:
Put Upside top roof
(L1) onto Bottom top roof (L2), tighten by bolt (CC) and washer (BB).
