background image

 

IMPORTANT:

 

1. Keep all children and pets away from assembly area. Children and pets should be supervised when they 
are in the area of gazebo construction. 
2. The area for assembly should not be less than 6 feet from any obstruction such as fence, garage, house, 
overhanging branches, laundry line or electrical wires. 
3. 

This unit is heavy. 

Do not assemble this item alone. Four people are recommended for safe assembly. 

4. Some parts may contain sharp edges. Wear protective gloves if necessary during assembly. 
5. When assembling and using this product, basic safety precautions should always be followed to reduce the 
risk of personal injury and damage to equipment. Please read all instructions before assembly and use. 
6. For outdoor use only. Install on level ground. Stakes are provided to secure the gazebo in grass ground. If 
you wish to secure the gazebo to a wood deck or concrete surface, you will need to purchase fasteners 
appropriate for these surfaces. These are readily available at your local hardware store or home center.     
7. Check all bolts for tightness before and during usage. 
8. Please check your state and local regulations prior to purchasing. Some jurisdictions may require permits 
for, or otherwise regulate, installation and use. 
9. In areas subject to frequent severe weather, securing the gazebo to a deck, concrete patio or footings is 
recommended. 
10. Removal of accumulated snow on the gazebo roof with a roof rake is recommended. In areas that are 
regularly subject to blizzard conditions however, removal of the roof panel is suggested. The assembled roof 
structure can simply be left in tact until warmer conditions return. 
 

USE & CARE: 

1. This Gazebo is not a permanent structure and should be disassembled & stored away after use. 
2. Do not repack your gazebo until completely dry. 
3. This Gazebo must not be left erect in windy conditions. 
 

WARNINGS: 

1. Assembly Instructions must be followed. 
2. Pegs supplied must be used to hold this gazebo in place when upright. 
 

Post A 

 

Base cover 

 

Base C 

 

Triangle support 

 

Decorative slot 1 

E1 

 

 

Decorative slot 2 

E2 

 

 

Decorative slot 3 

E3 

 

 

Parts List 

Summary of Contents for 125626










Reviews: