background image

18

Storage

•  Ensure that the guide bar cover is in place when storing.
•  Do not store the 

electric pole + chain saw near chemicals, 

such as fertilizers or other harsh solvents. Do not expose 

the plastic parts of the unit to brake fluids, gasoline, 

petroleum-based products, penetrating oils, or the like. 

These products are often highly corrosive and may cause 

permanent damage, weaken, or destroy the plastic parts 

of your unit.

• 

When not in use, your machine should be stored indoors 

in a dry and high or locked-up place, out of the reach of 

children.

Support

If your Sun Joe

®

 SWJ805E electric pole + chain saw requires 

service or maintenance, please call 1-866-SNOWJOE  

(1-866-766-9563) for assistance.

Model and Serial Numbers 

When contacting the company, reordering parts, or arranging 

service from an authorized dealer, you will need to provide the 

model and serial numbers, which can be found on the decal 

located on the housing of the unit. Copy these numbers into 

the space provided below.

Record the following numbers from the housing or handle of your  

new product:

S   W  J   8    0   5   E

Model #:

Serial #:

Chain Maintenance Table

33

3/8

inches

mm

Drive Links

Chain Pitch

Chain Gauge

File Diameter

inches

mm

inches

mm

9.5

0.050

1.3

4

5/32

Summary of Contents for SWJ805E























Reviews: