13
V)
Use the Soap nozzle (black) for low-pressure detergent
application to clean equipment, remove mildew and
oxidation stains from houses, clean bricks or degrease
grimy surfaces.
NOTE:
When using detergent, make sure to install the
correct Soap nozzle (black). All of the other colored
nozzles will not work for detergent application.
VI)
The rotary turbo nozzle automatically spins a zero
degree spray in a circle at high speed. The spinning
water jet hits the surface area from multiple angles,
quickly breaking down caked-on dirt and grime. The
turbo nozzle can cut cleaning time by up to 40%.
6.
Start at the top of the area to be rinsed and work your way
down, making sure to overlap your strokes.
m
IMPORTANT!
NEVER USE:
• Bleach, chlorine products, and other corrosive chemicals
• Liquids containing solvents (e.g. paint thinners, gasoline,
oils)
• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit and will damage the
cleaning surface.
Shutting Down
1.
Turn the switch to the STOP (0) position and unplug the
power cord from the outlet.
2.
Turn off the water source.
3.
Hold the trigger to release water pressure.
4.
Disconnect the garden hose from the water inlet on
the unit.
5.
Disconnect the high-pressure hose connection on the
trigger gun handle.
6.
Release the trigger and engage the gun safety lock.
m
WARNING!
Turn off the water supply and squeeze the
trigger to depressurize the unit. Failure to do so could result in
personal injury due to discharge of high-pressure water.
Taking a Break
If you are taking a break of five minutes or more between
cleaning tasks:
1.
Engage the gun safety lock (Fig. 13).
2.
Turn the switch to the STOP (0) position.
3.
Unplug the power cord from the outlet.
Storage
Hose reel
1.
Unlock the hose reel by pulling out on the handle out
(Fig. 18).
2.
Turn the handle counterclockwise to wind the hose
(Fig. 19).
3.
Wind the hose until you reach the hose's end.
4.
Push the handle in to lock the reel.
m
CAUTION!
Always store your pressure washer in a
location where the temperature will not fall below 32ºF (0ºC).
The pump in this machine is susceptible to permanent damage
if it freezes.
FREEZE DAMAGE IS NOT COVERED BY THE
WARRANTY.
• Store the pressure washer indoors in a dry, covered area
where it is not subject to adverse weather conditions.
• It is important to store this product in a frost-free area.
• Always empty water from all hoses, the pump, and the
detergent tank before storing.
m
CAUTION!
The use of a pump protector is
recommended to prevent cold weather damage during storage
over the winter months.
Fig. 18
Hose reel
handle
Fig. 19
Hose reel
handle
Summary of Contents for SPX4001-PRO-RM
Page 19: ...19 NOTES ...
Page 20: ...sunjoe com ...
