background image

4

Product Description

Purpose

•  This high-pressure electric power washer is intended for 

residential use only. It is designed for light-to-medium duty 

cleaning jobs on boats, motorcycles, RV’s, ATV’s, trailers, 

decks, barbecues, siding, patio furniture, and more.

Areas of application

•  Never use the machine in potentially explosive areas under 

any circumstances!

•  The operating temperature must be between 32ºF (0

ºC) and 

104ºF (40ºC).

•  The machine consists of an assembly with a pump, which 

is encased in a shock-absorbing housing. To provide the 

operator with an optimal working position, the machine is 

equipped with a spray wand and a non-slip handle grip, 

whose shape and configuration comply with applicable 

regulations. 

•  Do not cover or modify the spray wand or the spray nozzle 

in any way.

•  The high-pressure electric power washer is designed to be 

used with cold or lukewarm water; higher temperatures can 

damage the pump.

•  Do not use water that is dirty, gritty, or contains any 

chemical products, as such impurities could impair 

operation and shorten the life of the machine.

Summary of Contents for SPX1501





















Reviews: