background image

11

SNOW JOE

®

 + SUN JOE

®

 REFURBISHED GOODS WARRANTY

GENERAL CONDITIONS: 

Snow Joe

®

 + Sun Joe

®

 operating under Snow Joe

®

, LLC 

warrants this refurbished product to the original purchaser 

for one year against defects in material or workmanship when 

used for normal residential purposes.  If a replacement part or 

product is needed, it will be sent free of charge to the original 

purchaser except as noted below.
The duration of this warranty applies only if the product is put  

to personal use around the household. If the product is put to  

any business, commercial or industrial use or is rented or leased, 

then the duration of this warranty is 90 days from the date of 

original purchase. It is the owner’s responsibility to correctly 

perform all maintenance and minor adjustments explained in  

the owner’s manual.

HOW TO OBTAIN YOUR REPLACEMENT PART OR PRODUCT:

To obtain a replacement part or product, please visit 

 

snowjoe.com/help or email us at [email protected] for 

instructions. Please be sure to register your unit beforehand to 

speed up this process. Certain products may require a serial 

number,  typically  found  on  the  decal  affixed  to  the  housing 

or guard of your product. All products require a valid proof  

of purchase.

EXCLUSIONS:

•  Wearing  parts  like  belts,  augers,  chains  and  tines  are 

not covered under this warranty. Wearing parts can be 

purchased at snowjoe.com or by calling 1-866-SNOWJOE  

(

1-866-766-9563).

•  Batteries  are  covered  in  full  for  90-days  from  the  date  of 

purchase. 

Snow Joe

®

 + Sun Joe

®

 may from time to time change the design 

of its products. Nothing contained in this warranty shall be 

construed as obligating Snow Joe

®

 + Sun Joe

®

 to incorporate 

such design changes into previously manufactured products, 

nor shall such changes be construed as an admission that 

previous designs were defective.
This warranty is intended to cover product defects only.  

Snow Joe

®

, LLC is not liable for indirect, incidental or 

 

consequential damages in connection with the use or misuse of 

the Snow Joe

®

 + Sun Joe

®

 products covered by this warranty. 

This warranty does not cover any cost or expense incurred  

by the purchaser in providing substitute equipment or service 

during reasonable periods of malfunction or non-use of this 

product while waiting for a replacement part or unit under this 

warranty. Some states do not allow exclusions of incidental 

or consequential damages so the above exclusions may not 

apply in all states. This warranty may give you specific legal 

rights in your state.

HOW TO REACH US:

We’re here to help Monday through Friday from 9AM to 6PM EST. 

You can reach us at 1-866-SNOWJOE (

1-866-766-9563), online 

at snowjoe.com, via email at [email protected] or tweet us  

@snowjoe.

EXPORTS:

Customers who have purchased Snow Joe

®

 + Sun Joe

®

  

products exported from the United States and Canada should 

contact their Snow Joe

®

 + Sun Joe

®

 distributor (dealer) to obtain 

information applicable to your country, province or state. If for 

any reason, you are not satisfied with the distributor’s service, 

or if you have difficulty obtaining warranty information, contact 

your Snow Joe

®

 + Sun Joe

®

 seller. If in the event your efforts 

are unsatisfactory, please reach out to us directly.

Summary of Contents for SDJ616-RM













Reviews: