sunjoe GTS4000E Operator'S Manual Download Page 7

Page: 7 / 32

Know Your Lawn + Garden Multi-Tool System

Read the owner’s manual and safety instructions carefully before operating the hedge trimmer, pole hedge trimmer, grass trimmer

and garden tiller. Compare the illustration below to the power tool in order to become familiar with the location of the various

controls and adjustments. Save this manual for future reference.

Technical Data

Rated Voltage

120 V ~ 60 Hz

Telescoping Pole

3.8 ft to 5.9 ft

(1.16 m to 1.8 m)

Overhead Reach

Up to 13 ft (4 m)

Multi-Angle Head

-20º, 0º, 20º, 40º, 60º

Hedge Trimmer

Power

4.5 amp

No Load Speed

1600 rpm

Blade Movement

Dual-action

Blade Material

Rust-resistant steel

Blade Length

19 in. (48 cm)

Cutting Diameter (Max)

0.7 in. (1.8 cm)

Hedge Trimmer Weight

6.2 lbs (2.8 kg)

Pole Hedge Trimmer Weight

9.5 lbs (4.3 kg)

Grass Trimmer

Power

3 amp

Cutting Swath

12 in. (30.5 cm)

Spool Length

26.3 ft (8 m)

No Load Speed

7500 rpm

Spool Advance

Auto-feed

Line Diameter

0.063 in. (1.6 mm)

Trimmer Weight

7 lbs (3.2 kg)

Garden Tiller

Power

3.5 amp

No Load Speed

300 rpm

Rotor

4 steel tilling blades

Cultivating Width (Max)

6.1 in. (15.5 cm)

Cultivating Depth (Max)

6 in. (15 cm)

Tiller Weight

11.3 lbs (5.1 kg)

1. Safety lock button

2. Rear handle

3. Appliance cord

4. Cord restraint hook

5. Quick-release button

6. Telescoping pole

7. Auxiliary handle

8. Shoulder strap buckle

9. Shoulder strap

10. Telescoping locking coupler

11. Handle pivot latch

12. Angle adjust button

13. Quick-release button

14. Hedge trimmer cutting head

15. Hand safety switch

16. Hedger safety guard

17. Blade cover

18. Hedge trimmer cutting blade

19. Quick-release button

20. Grass trimmer cutting head

21. Flower guard

22. Trimmer line

23. Spool

24. Trimmer safety guard

25. Quick-release button

26. Garden tiller head

27. Tiller blade

Summary of Contents for GTS4000E

































Search results

Summary of Contents for GTS4000E

Reviews:

Brands by name

Popular brands

sunjoe GTS4000E, Operator'S Manual

Search results

Summary of Contents for GTS4000E

Reviews:

Brands by name

Popular brands