manualshive.com logo in svg

sunjoe GTS4000E, Operator'S Manual

Share
Download
sunjoe GTS4000E Operator'S Manual Download Page 26

26

IMPORTANT:

 

The blades must be set in the correct turning 

direction. Note the position of the original blades, and replace 

them in the exact same direction.

5.  Only use blades that are produced by the manufacturer.

Cleaning, Maint 

Storage

m

WARNING!

 Unexpected blade movement may cause 

personal injury. Before servicing, repairing or inspecting 

the unit, turn the motor OFF and disconnect the extension 

cord. Wait for the blades to completely stop rotating before 

conducting inspection, cleaning or maintenance.

m

WARNING!

 Contact with hot components (i.e. motor 

housing or gear box) on the machine may cause burns. Allow 

the machine to cool off before handling.

IMPORTANT! 

• 

Wear protective gloves when cleaning or maintaining the 

machine.

•  Do not use cleaning fluids or solvents or spray the 

machine down with water (especially pressurized water) 

when cleaning the machine. 

NOTE: After each use, follow these steps when cleaning the 

machine:

Fig. 61

Fig. 62

Fig. 63

Fig. 64

Locknut

Fig. 65

Fig. 66

Summary of Contents for GTS4000E

































Reviews:

No comments

Brands by name

Popular brands

Load more brands