9
NOTE: Adjust the lower handle to the desired position for
comfortable height by aligning the line on the adjusting
gear wheel with one of the three lines on the sca
dethatcher body (Fig. 3).
3. Secure the two middle handle bars to the lower handle
bars using a set of knobs and bolts. Tighten the knob on
each side to ensure a secure fit
(Fig. 4).
4. Connect the upper handle frame to the middle handle bars
using the remaining knobs and bolts. Tighten the knob on
each side to ensure a secure fit (Fig. 5).
5. Fix the cord with the spare cord clip and the clip on the
adjusting gear wheel (Fig. 6).
Thatch Collection Bag Assembly
m
WARNING!
Do not attempt to use the product without
the thatch collection bag attached. This could pose a danger
of flying debris.
m
WARNING!
The product must be switched off and the
cutting device must have stopped rotating before you attach or
empty the thatch collection bag.
m
WARNING!
Never use the scarifier without the thatch
collection bag securely fitted.
NOTE: A full thatch collection bag will reduce the performance
of this product.
Fig. 2
Lower handle
bars
Bolts
Knob
Knob
Fig. 3
Low: 37.4 inch (95 cm)
Middle: 41.3 inch
(105 cm)
High: 45.2 inch (115 cm)
Fig. 4
Lower handle
bars
Middle
handle
bars
Middle handle
knob + bolt
Fig. 5
Middle handle
bars
Upper handle
knob + bolt
Upper
handle
frame
Fig. 6
Cable clips